Method of installation and use Connect with computer through USB interface directly. When the buzzer sounded, reader into the self-inspection. And the same time, LED turn into red means standby. Open the output of computer software,such as Notepada word document or Excel sheets. The mouse in Notepad or WORD document clicking. Put tag on the top of reader, the software will output a data(card number) of the tag. When reading the tag, LED light change from red to green. Detecting device is connected Open the Device Manager of computer, If appears Humans Input Device that means Reader has successfully into computer. Ⅲ Precautions Do not install the reader on the magnetic objects and metal objects, they will seriously affect the RF signal. If after reading, the tag is still in the induction zone, the RF reader will not send data and without any hints. Ⅳ Common problems Operation without feedback: Please check whether the interface plugged in, whether the tag is a valid or whether another RF tag is within the reading range. Data error: Please check Whether the mouse is moved, whether the reader is in a critical state and whether the cable length is too long. |
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.